RECOVERY
44' 1980 Nordic 44 Sloop
$164,000.00
Last Updated: 2025-04-29
The Nordic 44 is a world class offshore cruiser designed by renowned naval architect Bob Perry. She was American made in Bellingham, Washington to extremely high standards by Nordic Yachts. Nordic yachts are often compared to Passport, Valiant or Mason's in concept but will out sail these designs with superior performance. This is truly a high performance sailing cruiser and does not sacrifice strength to achieve this. She is capable of taking you wherever your heart desires.
Bob Perry, the designer, was known to comment that the Nordic 44 was his favorite design. Particular attention was paid to the ability to sail to windward. The keel is a foil design with the lead ballast in the bottom 40% of the keel plan form. The large rudder is very far aft on a full-length skeg for maximum strength, protection, tracking and maneuverability. Nordic built thirty-nine 44's, of which some 30-40% have crossed oceans and a number of them have circumnavigated the globe.
The NORDIC 44 is known to be easy for 2 people to sail comfortably and safely. RECOVERY! has been double handed up and down the California coast many times as well as extended cruises to the Sea of Cortez and back. Her knowledgeable yachtsmen owners have incorporated many improvements making her easier to handle and more comfortable offshore and on long passages. Her gorgeous teak interior is like a luxurious home with a central hydronic diesel heating system, excellent galley, large stall shower and comfortable berths.
With the fully outfitted Avon dinghy, brand new Yamaha 10hp outboard and her water-maker, RECOVERY is ready to start cruising today.
Make: Nordic
Model: 44 Sloop
Year: 1980
Length: 44ft
Name: RECOVERY
Hull Material: Fiberglass
Engine/Fuel Type:
Located In: San Francisco, CA
- Details
- Dimensions
- Engines
- Tanks
- Accommodations
- Category: Sail
- Class: Racers and Cruisers, Cruisers
- Designer: Robert Perry
- Builder: Nordic Yachts, Bellingham WA
- Length Overall: 43.83 ft
- Length at Waterline: 35.42 ft
- Beam: 12.92 ft
- Draft: 7 ft
- Displacement: 24,000 lb
- Ballast: 9,340 lb
Engine 1
- Make: Yanmar
- Model: 4JH2-TE
- Fuel: diesel
- EnginePower: 62|horsepower
- Type: Inboard
- Hours: 1205
- Fuel Tank: 75|gallon
- Water Tank: 150|gallon
- Holding Tank: 32|gallon
- Cabins: 3
- Heads: 2
Additional Descriptions
The NORDIC 44 is a perfect size for 2 people to handle comfortably. RECOVERY! has been double handed up and down the California coast many times as well as to Mexico and back. Improvements incorporated over the years have made it easier, more comfortable, and safer to handle offshore and on long passages. She has an excellent electronics configuration, almost new sails, hydronic diesel heating system and water maker. With the fully outfitted Avon dinghy and brand new Yamaha 10hp outboard, RECOVERY! is ready to go cruising today.
She was refitted with a new mast step, made of 3/4” stainless steel. At the time of the refit additional stringers and transverse floors were installed and secured to the hull and each other with unidirectional fiberglass. The entire bilge was sealed in white epoxy paint. Finishing off the mast step refit, a whole new cabin sole of Alaskan Yellow Cedar and Teak was installed throughout. At the time the sole was installed, 18 bilge hatches were cut into it for abundant additional easily accessible storage. For example, the bilge storage under the galley sole will hold 3-24 can cases of Coke can size beverages. Ample room for tool storage in the hatches near the nav station. It is an excellent improvements that is not found on other Nordic 44's. The rod rigging is in like new condition. New swivel fittings at the deck and the mast were installed. Triple size chain plates were installed before the mast was re-stepped. New larger adjustable spreader lights, and combination bow/steaming lights were installed. High gain VHF antenna installed at mast head as well as low wattage LED tricolor/anchor/strobe lights. Wiring for running lights was replaced also. The Navtec hydraulic vang and back stay pistons and controller pump were rebuilt by the manufacturer. Isolators for the SSB were installed on the back stay. The running back stays were rewired/roped and blocks replaced. The owners also installed many smart features that they felt were needed after many years of sailing experience, such as more louvered vent doors and panels, interior and exterior lighting, additional VHF radios, signaling equipment, and fans are some examples.
Flip the Courtesy Light switch on (two toggle switches located on port side companionway entrance) to illuminate the ladder and the cabin sole (eight lights in total) all the way into the V-berth before descending the ladder. Companionway ladder light is switched separately from the cabin sole courtesy lights. Stepping below on the solid teak (double side framed) companionway ladder (with starboard bulkhead hand rail) brings you into the warm fully teak paneled interior of RECOVERY!, all of which has been highly maintained. All bulkheads are varnished with a hand rubbed satin varnish and teak trim and doors are accented in high gloss. The mast is covered in warm beige dyed leather. All overhead panels are brushed ultra-suede (except heads), steam stretched over padded headliner panels. All panels are removable for easy access to wiring, lighting, and deck fitting backing plates and hardware anchors. All doors are panel and frame teak with brass hardware. The recessed lighting is Italian design, CANTALUPI, and surface mount double function/switch fixtures are Alpenglo.
The solid teak companion way ladder is removable for easy access to the highly organized and well lit (3 movable arm halogen lights) engine room. The engine room houses the 75 gallon diesel fuel tank as well. There is an 18” x 18” teak wet-grate at the base of the ladder, to catch spray and other water, to minimize tracking into the aft cabin or the forward compartments. At the top landing of the ladder, and tucked under the cockpit, is an electrical substation that has large dial circuit switches for 1) House, 2) Engine, 3) Parallel, 4) Windlass electrical control. Also located here is a small circuit breaker panel for: 1) Bow Wash Down Pump, 2) Engine Room Lights, 3) Espar Heater, 4) Locker Lights for Storage lockers under the forward berth, and 5) Courtesy Lights. The TANK TENDER and HIGH WATER ALARM are located next to the breakers. There is a fire extinguisher mounted at this landing as well.
The aft cabin berth is to the port of the companionway ladder, opposite the aft head, and a bi-fold arched door closes it off from the main salon. There is a double dog port light above the large double door clothing locker. A padded seat bench, with storage, is below this large 3-shelf clothing storage locker. One of the heat exchangers for the central heating system is located through the face of the bench seat storage locker, providing an abundance of warmth for the aft cabin, yet there is ample room for dry storage of shoes, etc. inside. A great place to dry shoes or gloves when the heater is on. There is a courtesy light built into the face of this locker above the louvered radiator vent. There is a large drawer under the aft cabin berth that we used for gloves, hats, etc., storage which is easily accessible from the cockpit. The aft cabin berth is full size and tapers slightly to the stern, following the lines of the hull, to a unidirectional fiber glass reinforced athwartship bulkhead with a snap closure access panel. This panel opens to the aft/port quarter (under the port and aft cockpit lazarett access/seating) for easy access to port cockpit scupper thru hulls, ESPAR D10-W HYDRONIC HEATER controller for 4 radiator/blower units, auto pilot, port side hot water plumbing, and other wiring and plumbing lines. Lighting over the aft cabin is ALPENGLO 2 way florescent fixture with white or red night light position plus bright or dim light level selection. There are two CABIN directional positioning reading lights over the aft cabin berth. There is a dorade ventilation vent located in the overhead next to the Alpenglo. A shallow 3” wide by 2” deep shelf runs the width of the cabinetry above the berth. The thermostat control for the ESPAR heater is located here. There are two large lockers above the aft cabin berth giving access to the engine instruments and VHF (2nd) radio which is mounted in the cockpit to the port of the companionway, as well as cockpit reading light wiring. These lockers provide storage for emergency equipment such as flare gun, horns, or other equipment as needed easily accessible to the cockpit. There is a 6” NICRO MARINE oscillating fan located between the two doors. The HEART FREEDOM 25 Inverter, start battery, and 3-8D gel/mat deep cycle batteries are located under the aft cabin berth with ample cooling and air flow. There is additional space in this area, under the aft cabin berth, for lengthy or bulky items. We store bulky hoses, pipes, etc. in this area.
Forward through the arched bi-fold Aft Cabin door brings us into the main cabin area. To the Starboard is the Navigation Station. To the port is the Galley. Forward is the Main Salon and further on to the Forward Cabin and Forward Head.
The forward facing nav station has a large chart size table and a padded closed cell foam cushion bench seat. There is abundant storage under the nav station seat for easy access to tools or equipment. The nav table lifts up and has a spring lock to hold the table in the open position in smooth or bouncy seas. There is a dim-able halogen flush mounted light and 2-18” flexible rod Hella halogen lights for placing the light where you need it. These lights have red lens inserts for night running. The Raytheon Radar is suspended from the overhead on a swivel that keeps the nav station open. A VHF ICOM M502 (1st) radio is located on the forward bulkhead along on with the Raytheon Raychart 600 charting controller. This leaves a clean and uncluttered nav station. This VHF is connected to the mast head antenna. On the outboard side of the nav table is the BASS electrical panel for AC and DC house and equipment circuits. An additional (3rd) VHF SBE radio is set into the Bass panel area as a back up. A pair of 12volt DC auto style outlets is located forward of the BASS panel. Below these two DC outlets is a 750 watt two AC outlet inverter. This converts house battery DC power to AC for running laptops or other small electronic gear or telephone chargers at the nav station without firing up the big Heart Inverter. Aft of the SCS PTC-II email decoder is the refrigeration interpreter (on-run-default lights) plus the reefer and freezer hour meters. Aft of the Bass Panel is the Single Side Band (SSB) ICOM IC-710 radio, the Garmin GPS, a spare loran, and the RAYMARINE instruments controller. The Heart Interface LINK 2000 is also mounted here above the ALPHA 3000 Auto Pilot. There is a small storage under this area for head phones, radios etc. There is a recessed two shelf book storage area on the aft bulkhead of the Nav Station. The aft starboard speaker for the surround sound system is located in this shelf. Under the nav table are 2 large storage shelves easily accessible through tall split doors. The sub woofer for the surround sound system is located in the outboard section of the upper shelf of this locker. There is a dogged port light over the nave station seat area. An overhead teak grab rail runs from the nav station all the way forward to the Main Salon forward bulkhead.
The U-shaped galley has a new refrigerator system installed incorporating a double plate water cooled system for separate freezer and reefer compartments. Designed, built and installed by Peter Grey of Sailnetics, Alameda, CA. The box was redesigned and installed by the owners. The box’s hull and bottom sides are nine inch thick closed cell insulation and the forward, aft and top sides are five inch thick closed cell insulation. The 3/4” marine plywood box shell is sealed with 5 coats of moisture barrier paint before the insulation was installed and then covered and sealed with durable plastic for easy cleaning. Both compartments have wireless Oregon Scientific temperature sensors to a master station located over the freezer access hatch. This temperature station also reads the Galley and Aft Head ambient temperatures. The counter top was restored to its original warm beige Formica finish. Above the counter is unobstructed into the main salon. The reefer/freezer compressor (located behind the port settee in the main salon) runs approximately 30-45 minutes per day, even in hot weather. Actual time depends on how often and how long the top access hatches are opened and how hot the weather. The hour meters are located over the BASS panel at the Nav Station. There are two large (tall and deep) storage compartment to the right of the reefer/freezer compartment below the counter. These are accessible through two tall narrow doors. This area was originally 4 drawers ,but with very little storage area in them. We dispensed with the drawers and hardware and made two large spacious cabinets, but used the drawer fronts as the front doors to the cabinet.The outboard side of the galley has the FORCE 10, 3 burner propane stove with 2 shelf oven and separate broil and bake burners and electrical ignitor. There is a cooks belt/harness rod in front of the FORCE 10 There is also storage and easy access to plumbing and wiring under the stove platform. The magnetic water pump for the water cooled refrigeration compressor is located here. The MAGIC CHEF microwave is just forward of the Galley forward bulkhead in the main salon. Above the stove and along the full fore to aft length of the Galley is shelving compartments for dishes, cook wear, food storage, etc. There are two 115volt AC outlets at each end of these cabinets. There is a port light hatch over the stove and over head hatch opening onto the deck as well for additional ventilation. The aft area of the galley has the double stainless steel sink which has a 12” high arching single control swivel spigot. The outboard corner of the counter top houses a removable lid for easy access to the waste container. There is a long spice rack located above the sink that holds 16-18 spice jars. There are 2 large cabinets above the spice rack for food, etc. One of these houses the port starboard speaker for the surround sound system with some space to spare. There is an ALPENGLO two way florescent fixture with white or red night light position plus bright or dim light level selection. There are two recessed CANTALUPI Italian design lights positioned over the reefer and freezer hatches counter. There is a 6” HELLA adjustable speed oscillating fan over the galley area. Below the sink is the SPECTRA WATER MAKER Model 380C, all related high output water feed pumps, related function gauges and valve controls, and membrane. Below the SPECTRA is ample storage and access to other plumbing and the two foot pumps. The wide doors provide easy access to thru hulls for salt water intake for the galley sink foot pump, grey water discharge, and intake for the refrigerator compressor cooling coils. There is also a foot pump for fresh water from the 150 gallon fresh water storage located under the settees. There is a large bilge storage access hatch in the center of the galley sole. This extends under the reefer area and the galley sink area and can hold 3-24 can cases of Coke can size beverage containers. There is a courtesy light under the louver vented SPECTRA access doors illuminating the galley sole.
The MAIN SALON is warm and comfortable and well lit. The third ESPAR radiator is located on the starboard side in the short storage area at the aft end of the settee. This radiator pumps out abundant heat for the salon. Lighting is with 4 ALPENGLO 2 way florescent fixtures with white or red “night running” light position plus bright or dim light level selection. There are also 7 recessed Italian designed CANTALUPI brass lights in the overhead, and all individually switched with switches ganged on the overhead and conveniently located. There are 4 swivel “CABIN” (brand) lights in each corner of the Main Salon. The starboard side has a full length settee with two large panel doors for storage behind the closed cell upright cushion. The surround sound system amplifier system is in the forward of these storage areas leaving the other high capacity area open for large food storage items. A baffled stainless steel 100 gallon fresh water tank is located under this settee and there is a courtesy lights placed on the face of the settee base for ample illumination of the passageway at night. Above the settee is the 26” TOSHIBA LCD TV/DVD mounted on a wall mounted articulating arm. The TOSHIBA ties into the surround sound system powered by four JENSEN 300 WATT AMPLIFIERS. To the forward side of the TV is the KENWOOD Z828 am/fm/cd radio/player and additional storage in open shelves above and below. The KENWOOD is wired to plug into iPODs. The forward starboard speaker for the surround sound system lives here. Aft of the TV are two large storage compartments with 2 deep shelves each for abundant storage of food stuffs, etc. The aft starboard bulk head is open and arched for unobstructed view from the Nav Station area. The forward bulkhead of the Main Salon is matched mirrored teak with an arched door leading to the forward cabin and head. The CHELSEA striker clock and WEEMS & PLATH Barometer are mounted on the bulkhead starboard of the doorway. The port side of the forward bulkhead is left open to admire the beautiful wood work. The port side of the Salon holds the dining table which is notched for the beige leather covered mast and has a removable wing. This wing adds two thirds additional table space for dinning. The table, without the wing, can be lowered and sits on a cleat along three sides for stability. This configuration makes a Queen size “harbor berth” for a very ample and additional sleeping area. We use this area, while offshore, for comfortable snoozing while off watch or as the main “harbor” berth while at anchor. This makes for great “theatre” seating for the LCD screen across the cabin. The settee is large and has an angle section near the galley end that leads to the athwartship seat. There is a courtesy light facing the passageway on the inboard end of the settee base. Cushions are closed cell and comfortable. Behind the angle section is the access to the reefer/freezer compressor and all related circuitry. Forward of the compressor area, behind the settee cushion are two large storage areas for many uses. Below the settee seat cushion near the galley end is the other baffled stainless steel 75 gallon fresh water storage tank. The flux gate compass is located in this area near the passageway and away from any magnetic influence. Above the settee are long drop down panel doors for easy access to additional storage. The upper shelf above this storage is set up for book and manual storage and the microwave lives at the aft end of this shelf, yet inboard of manuals storage area. A long fixed port light runs the length of the Salon on port and starboard sides providing ample light and visibility. There are prism lights forward of the port lights to provide additional natural light at the forward ends of the port and starboard settees. There are two deck hatches in the Main Salon located midships for additional light, ventilation, and access to and from the Main Salon as needed. There are 9 bilge hatches in the Main Salon and 3 in the passageway between the Nav Station and the Galley.
Moving from the Main Salon through the arched closable doorway into the forward cabin brings us to storage lockers on the starboard side and the entry door to the forward head on the port side. There are two large storage cabinets on the starboard side, one for hanging and the other for shelves. Below the hanging locker sole is the fourth, and final, radiator for the ESPAR heating system in an easily accessible storage compartment. This provides ample heat for both the forward cabin and the head when the cabin door is latched closed. There is one Alpenglo overhead light and recessed CANTALUPI Italian light fixture in the passageway of the cabin. There are two courtesy lights placed near the sole in the passageway and berth area for night time illumination. There are 3 bilge hatches in the passageway as well. These bilge areas have drainage holes for the anchor locker area for removing chain water and for some ventilation. The port side of the cabin has a tall 4 door storage cabinet with swing down doors. The lower most drop down drawer has access to head out-flow and intake plumbing. The V-berth is large and ample for 2 people to sleep in. Below the berth is the anchor chain slide and storage area. The custom designed/built stainless steel slide allows for easier transition of the chain from the windlass to the lower point of storage. This removes the bulk of the weight of the chain from the bow to a lower point in the boat. Below the port wing of the V-berth is easy access to the through hulls and valves for the forward head, the lavatory drain and the wash down pump. All the valving for this area is in this locker. The starboard side is also large and has ample room for storage. The three compartments under the berth are illuminated by dome lights controlled from the “locker lights” switch at the companion way ladder. These locker hatches are louvered teak for addition ventilation. At the forward end of the V-berth is the hatch for easy access to the windlass motor which was rewired when newly installed. There is a 4” wide ledge running along both sides of the berth. There are two recessed swivel lights in the overhead for reading illumination, and a 6” NICRO MARINE 2-speed oscillating fan over the berth. There are speaker mounting panels on the forward bulkhead that are wired to attach to the sound system.
The head has a lavatory with ample counter space on the outboard side and a Wilcox-Crittenden “Skipper” model head on the forward bulkhead. There is storage above and below the lavatory/counter. There is a port light above the cabinet area and a solar powered Nicro Fico exhaust fan mounted to the deck dorade vent. There is a manual foot pump for fresh water from the fresh water storage tanks, as well as the single control spigot from the pressure system. The lower storage cabinet provides easy access to the valved drain and foot pump plumbing. There is a large louvered vent panel in the lower cabinet face for increased ventilation. The sole is sealed from the other cabin areas to contain water in case of a leak or spillage from the lavatory. The overhead is washable warm beige Formica panel and holds the ALPENGLO 2 way florescent fixture with white or red night light position plus bright or dim light level selection. The bulkheads are all warm beige Formica panels matching the other Formica in the boat.
Raytheon 4KW R20X Radar with 24” antenna dome mounted on individual mast in stern starboard cockpit.
Radar/chart plotter/GPS are Raytheon Raychart 600 Electronic Charting and controller mounted at navigation station.
Raymarine wind/depth/speed with sea temp is mounted nav station with slave mounted at steering Raytheon 4KW R20X Radar with 24” antenna dome mounted on individual mast in stern pedestal binnacle in a single pod. WHATS AT BINNACLE??? Speed and depth are multi instruments with navigation data select-ability fed from nav station.
ALPHA 3000 Marine Systems Autopilot mounted at nav station with beefed up CMOS drivers to handle additional load in heavy weather. Electric drive ram system mounted to rudder steering post. Engage/disengage pull located behind wheel. Full Remote control via hand held unit on 10’ cord attachable to socket in starboard combing pocket. This remote is invaluable flexibility in moving in or out of weather as needed for piloting.
Cockpit compass Danforth High speed Constellation
FLUX GATE Electronic compass is Simrad RFC 35R rate compass
GARMIN 120XL GPS standalone unit
APELCO DLX 6350 LORAN backup unit
VHF: STANDARD Horizon Eclipse 25 watt VHF?FM radio mounted in cockpit
VHF: ICOM-502 25 watt VHF mounted at navigation station
VHF: ICOM 205fully functional Remote mic in cockpit on binnacle.
VHF: SBE 25 watt VHF mounted at nav station as a spare. Can easily be connected to hi gain antenna on mast head.
SSB is MICOM IC0710 mounted at Nav Station, includes insulated back stay with safety interlock.
ICOM AT-130/E Automatic Antenna Tuner for SSB
Insulators & ground system straps from stern to bow tied into keel. Excellent grounding pattern.
TELEX-High gain VHF antenna installed at mast head
Low wattage LED tricolor/anchor/strobe lights Mast head tricolor
Extra large adjustable spreader lights,
Sealed beams combination bow/steaming on mast model
Standard running/navigation lights
RAYMARINE masthead windex
HEHR Powerline 120 amp alternator/regulator for start battery charging mounted to Yanmar engine. Can be used with Parallel switch if house batteries are depleted
HEHR Powerline 150 amp alternator/regulator for house battery charging mounted to Yanmar engine
BASS electrical panel at nav station controls integrated 12V/110V electrical system, all AC shore power, and AC and DC distribution aboard.
28 AC circuit breakers 29 DC circuit breakers with 6 spares
Panel has an integrated amp meter for AC and DC
All wiring is labeled
Panel has “led” light on indicators for critical breakers
DC Sub-station mounted at companion way landing for easy access to some critical power controls. Easier for single or double handed sailing.
Shore power can be 110v 30/50amp. 2-50’ shore power cords.
Batteries are 3 Lifeline AGM house batteries with 720 AH capacity
Start battery is Lifeline
LINK 2000 Inverter controller for monitoring AMPS, AMP HOURS, BATTERY LEVELS, Times, and ‘Charge/Accept/Float’ indicator charging LEDs
Cabin lighting upgraded ALPENGLO 2 way florescent fixture with white or red “night running” light position plus bright or dim light level selection.
Courtesy lighting at cabin sole level throughout.
YANMAR 4JH2-HTE 4 cylinder, 62 horse diesel auxiliary power (replaced original Westerbeke)
WALTER RV50 V-Drive and transmission (oversized)
Racor Duel Head Model 75/B32009 fuel filters with electric primer pump
After modifications to the engine bed were complete, it was painted with Awlgrip epoxy engine,
room was insulated with new one inch foil faced foam and lead insulation
Seacocks bronze and grounded
Bilge pumps
1) Rule Automatic 1500 GPH with manual switch
2) Rule emergency pump 3700 GPH
3) Shower sump pump in separate container
GROCO C-60 Washdown pump kit installed under v-berth with on off switch at companionway
Engine shift and power controls are on the binnacle
Engine kill switch in starboard combing pocket
Yanmar Engine start panel with oil pressure and oil temp gauges mounted to port of companionway.
Oversize DC cables and circuits for heavy loads like windlass
EDSON 48” destroyer wheel with padded leather cover
PYI dripless packing gland
MODEL electric flow demand controlled fresh water pump
PALOMA propane water heater
SPECTRA 380C water maker with plumbed flushing system and easy access membrane
3-Blade feathering Max prop
ESPAR D10-W HYDRONIC HEATER diesel fired coolant circulated, 4 radiator system with thermostat control
Bronze vacuum breaker and sea strainer
Anti Syphon loops on all overboard plumbing systems
75 Gallon Diesel fuel tank
Freezer and Reefer separate box with individual plates from water cooled compressor designed and built by SAILWORKS (Peter Grey) Runs approximately 30-45 minutes per day
Force-10 3-burner propane stove with oven and separate broiler
Generous dry storage and bilge access storage
Large double SS sink with custom single control Grohe faucet
All water lines new
All water lines routed through a new manifold under sink and hot water manifold in stern near Paloma.
Spectra 380C water maker, membrane, and unique Davis Pump system under sink.
Custom back flush system using sea and fresh water
JABSCO PARMAX demand flow pressure hot and cold water pumps
Microwave
Foot pump for fresh water from fresh water tank
Foot pump for sea water
The hull and deck of the Nordic 44 are well known for their strength and solid layup.
The hull is solid FRP and the coach roof is cored.
The keel bolts are tightened and sealed
The original chain locker on the bow was refit holding the Lighthouse windlass with rope wildcat and chain gypsy. The windlass pan is reinforced with unidirectional fiberglass for strength.
The chain feeds down a new stainless steel slide that moves the chain lower and further aft to remove weight from the bow.
The new chain locker, under the v-berth, is reinforced with kevlar on the inside of the hull in its entirety for added strength creating a collision bulkhead. The slide is sealed in unidirectional glass and covered in stainless steel sheeting providing a slipper surface for the chain to slide to a lower point.
The bow roller was redesigned and built to cap the bow on port and starboard sides as well as a long stem plate in a single piece. This adds extra strength to the bow and roller when chain comes from the side.
The windlass locker on the bow has ample storage for the snubber and wash down house and other small tools.
The access door at the bow end of the v-berth gives easy access to the windlass motor, solenoids, and wiring for service.
The deck is non-skid light beige
The has been bottom was stripped to Gel-coat and five coats of Interlux 2000
barrier coat was applied, and then the bottom was painted with multiple coats of Petit Trinidad.
Painted aluminum Spar-Tech keel stepped mast
Pro-Furl roller furling head sail leading to cockpit
Lazy Jacks for FULLY BATTEN MAIN
Reef lines lead to cockpit
Standing rigging is Navtec rod (all swedges and hardware were die tested in 1998 and showed no deficiencies)
New Swivels at spreaders and mast head were installed 2000
Removable inner forstay.
Navtec hydraulic backstay and vang are controlled from a panel in the cockpit. Rebuilt in 2005
Primary winches are Barient Self Tailing
Main sheet and halyard winches are Barient self tailing
All sails are in like in excellent condition.
Full batten main with Harken batten cars & track
130% self furling Genoa
80% working jib
Asymmetrical pole-less cruising spinnaker with Stasher for esy deployment and dousing.
Tri-radial spinnaker with Spinnaker pole and Whisker pole
Running Rigging for spinnakers mounted to mast
20kg Bruce primary anchor on reinforced bow roller with 400 feet hi-strength all chain rode
45 pound CQR plow secondary bow anchor chain and rope rode
DANFORTH anchor chain and rope rode stern ready
Avon 10.3 inflatable board bottom
2 collapsable Oars
One seat
Dinghy anchor with 5’chain, and 50‘line
Yamaha 10hp New 2010
Adjustable Boarding ladder
Custom dodger, Bimini, and frames were installed in 2002.
Custom fold out cockpit table that expands to 20”x 20” with angle support leg for stability
Cockpit shower with hot and cold controls
Espar coolant reserve mounted in starboard combing pocket
AC input socket mounted in starboard combing pocket
Stainless Steel lifting arm with 4:1 lifting tackle /block for hoisting heavy weight such as dinghy motor
Stainless steel antennae farm mount on radar tower for various antennae
Teak dinghy motor mount attached to stern pulpit
Large Spinnaker blocks
Extra Jib sheet blocks
Mast to Stern self supporting Delta Awning/frame. The fame attaches to the Main Halyard and is pulled aloft to cover the deck and cockpit area from mast to stern pulpit. Lots of shade.
Stabilizer bars for radar mast
Cockpit reading light
Bose surround sound speaker system
Square Sealed beam light mounted on radar mast is adjustable for directing illumination around the cockpit area. Useful for night dinghy launching or boarding.
Heavy duty 12v 30amp DC outlet at Binnacle
VHF ICOM radio hand control socket mounted on Binnacle
Remote control for auto pilot connection in starboard combing pocket.
Boat hook
Three fenders
BAJA Fuel Filter
Extra fuel and oil filters
Swivel seats that mount in winches
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.