MOONSET

28' 2001 Alerion Express 28

$75,000.00

Last Updated: 2025-04-29

Sailboats are by nature graceful, and many claim to please your eye. But the Alerion Express 28 has consistently been recognized as one of the prettiest boats on the water. That she also has a thoroughly modern underwater shape simply adds to her lustre.

A maximized cockpit and cabin makes the Alerion Express 28 the perfect cruising yacht for you and your spouse – for weekend adventures or just a spur of the moment evening or after-work sail.

By preserving the traditional look topside – where it shows, and giving the hull a modern design below the waterline, the Alerion Express 28 offers the best of both worlds: great style and great performance along with the pride and admiration they bring.

A very manageable sailplan with a self-tacking jib boom is easily single-handed. And even the most die-hard racers speak of how beautifully balanced and delightful to sail the Alerion Express 28 is.

With over 450 AE28’s worldwide, this daysailer is by far the most popular of all the modern daysailers. With her inception in the mid 90’s the AE28 was also the first model to start this trend.

Currently, there are five active one design fleets for the AE28 throughout the country. The fleets range in size from 6 to 25 boats; with basic “main and jib only” rules there is no shortage of excitement and great sailing.

MOONSET was dry-sailed on Lake Tahoe and stored indoors. It has only been in the bay area since early 2014. It is getting freshly varnished brightwork, a polished Awlgrip hull and a complete interior and exterior detail. It will show like a new boat.

Make: Alerion
Model: Express 28
Year: 2001
Length: 28ft

Name: MOONSET
Hull Material: Fiberglass
Engine/Fuel Type:
Located In: Emeryville, CA

Videos

Alerion Express 28

  • Details
  • Dimensions
  • Engines
  • Category: Sail
  • Class: Racers and Cruisers
  • Keel: Fin Keel
  • Length Overall: 28.25 ft
  • Beam: 8.17 ft
  • Draft: 4.5 ft
  • Dry Weight: 5,700 lb
  • Ballast: 2,200 lb

Engine 1

  • Make: Yanmar
  • Model: 1GM10
  • DriveTransmissionDescription: Sail
  • Fuel: diesel
  • EnginePower: 9|horsepower
  • Type: Inboard

Additional Descriptions

Manufacturer Provided Description

The new trend to elegant day sailers was pioneered by the notable beauty of this Carl Schumacher design, which sailors instinctively pause to admire. Quality produced by Pearson Composites, utilizing the SCRIMP system of resin infusion by vacuum, the AE 28 also delivers outstanding performance under sail, and is specifically designed to be easily single handed. We have a 15 minute DVD that amply demonstrates that advantage. With a fin keel and spade rudder providing exceptional maneuverability and stability, the Hoyt Jib Boom bringing off wind speed, and a 14-hp Yanmar Diesel Sail Drive adding reliable power, this beautifully balanced boat sets the standard for the ideal day sailer.

Dimensions
    • Length Overall 28’-3”

      Length Water Line 22’-10”

      Beam 8’-2”

      Draft 4’-6”

      Air Draft 40’-0”

      Displacement 5700 lbs (including ballast)

      Ballast 2200 lbs

      Sail Area 352 sq ft

      Sail Area/Disp 17.7

      Aux. Engine 14HP

      Diesel with Saildrive

Construction
  • Hull Shell
  •  Infusion Molded (SCRIMP) GRP with biaxial and
  • unidirectional E-glass reinforcing fabrics
  •  End grain balsa core
  •  Vinyl ester resin gelcoat reinforcing layer
  •  White gel coat hull color
  •  Molded and tapered single gelcoat bootstripe – Owner’s
  • choice of color
  • Hull Structure
  •  Keel floors, keel sump, engine bed, mast step and
  • longitudinal stringers molded integrally with the hull
  • during the SCRIMP process
  • Deck
  •  Resin infused (SCRIMP) GRP sandwich structure with
  • biaxial reinforcing fabrics and end grain balsa
  •  White deck with molded Buff nonskid
  • Hull to Deck Joint
  •  Flange type joint bonded with Plexus MA550 adhesive
  • (ABS approved)
  •  Full length teak toerail
  • Ballast Keel
  •  Fin with integral bulb for low center of gravity
  •  One-piece lead casting alloyed with antimony bolted to
  • molded keel sump with 304 grade stainless steel bolts
  • Structured Bulkheads
  •  Marine grade plywood bulkheads bonded to hull and
Deck Hardware
  •  Two Lewmar 14st self tailing cabin top winches
  •  Harken Roller furling for 95% self tacking jib with port and starboard side sheeting
  •  Harken mainsheet led to 4:1 traveler system mounted on aft deck
  •  Harken mainsheet cam base and block mounted on a barney post
  •  Two 10” aluminum winch handles
  •  Adjustable (8:1) backstay below deck with lead to cockpit
  •  19”x19” Lewmar deck hatch with smoke tint
  •  (4) Fixed elliptical Bomar portlights
  •  8” Mooring cleats: 2 forward, 2 aft, 2 midship
  •  Custom-cast chocks for forward and midship cleats
  •  Teak and lexan companionway hatch slider with lexan drop-in washboard
  •  Halyards led aft thru deck mounted Harken fairleads and clutch stoppers port and starboard
  •  Custom stainless stemhead with welded jib tack and fair lead ring
  •  Teak handrails on cabin house
  •  Teak toe rail
  •  Self draining cockpit
  •  Flag, teak flag pole and socket
Standing and Running Rigging
  • Standing and Running Rigging
  •  1x19 stainless wire standing rigging with open barrel turnbuckles
  •  Continuous rigged system for easy rig tuning
  •  Custom port and starboard chainplates
  •  Internal main and jib halyards
  •  Lazy-jacks and single line reefing for mainsail
  •  Windex
  •  Hall Quick Vang system
Sail Area


Working Sail Area : 352.00 sq ft

Dacron Main Sail: 2001

Dacron Jib: 2001 (Class Legal 90)

North Mylar over Kevlar 155 (Registered not class legal)

Heavy North Mylar over Kevlar 155 (Registered not class legal)

Square Symmetrical Spinnaker (Navy Blue and Gold)

Electrical
  • Electrical
  •  12VDC system built to A.B.Y.C. standa rds
  •  12 Volt Starting battery,12 Volt House Battery
  •  DC electrical panel w/8 circuit breakers
  •  Guest battery switch
  •  (2) Swivel reading lights
  •  (2) Overhead dome light
  •  Navigation lights
  •  Mast and chainplates grounded to keel for lightning protection to meet A.B.Y.C. standards
Interior
  • Interior (General)
  •  Marine grade plywood bulkheads with white, low maintenance laminate and teak trim
  •  Vinyl overhead with teak portlight trim
  •  3” urethane foam cushions - Owner’s choice of fabric
  •  Sealand portable head
  •  38 qt. icebox / companionway step w/teak and holly lid
  •  Teak and holly cabin sole
Additional Information
  1. Shore Power and Battery Charger
  2. Two new batteries in 2014
  3. Stereo and Amplifier
  4. KKMI jib boom kicker which functions as a hands free whisker pole below deck

  5. Fresh hard bottom paint in 2014

  6. Midship cleats and chalks were added

  7. Tiller auto pilot installed

  8. GPS and Chartplotter
Robert Perry Review

As I look back through all the volumes of SAILING, one of the thoughts that strikes me is where are all the old boat designers today? Some, like my old drinking buddy Gary Mull, are dead. I didn’t know Carl Schumacher well but I knew him and I was saddened when I heard he had died at such a young age. Carl had a good eye and he knew how to draw a fine sailing boat. His Express 37 remains one of my all-time favorite boats. I have no idea where some of the other designers went. I know where German Frers went. It seems that many of those confident yacht designers that were going to set the world on fire and show us how it’s really done have just gone quietly away. Maybe they found real jobs.

In the mid-1990s the typical small family cruiser-racer or racer-cruiser had become a complex boat. Vendors were convincing sailors that they had to have everything in order to be happy and enjoy sailing. Ralph Schacter had another idea. He knew that most sailors went out for a day, sometimes just an afternoon or evening, and did not need things like shower stalls, refrigeration, windlasses with all-chain rode and hot-and-cold running water. But they did need a head and a place to sleep on weekend overnighters. Picking the name of Nate Herreshoff’s own daysailer, Alerion, the Alerion Express was born with pretty hull lines drawn by Carl Schumacher. The era of the big, comfy daysailer had begun.

I say “big” because at that time my own idea of a daysailer was a Thistle class or any number of small dinghy one-designs. Schacter’s idea was that these new daysailers would be big enough to be keelboats with near the level of comfort found on the majority of production cruiser/racer types.

The look of the new daysailer would be traditional, with low freeboard, some overhangs, a svelte cabintrunk that gave slightly less than full standing headroom and a long cockpit. But below the DWL this traditional appearing boat would be modern with flat rocker, a moderate aspect ratio fin keel and a partially balanced spade rudder. The D/L of the Alerion Express 28 is 168 and the L/B is 3.46, putting it on the narrow side of “medium.”

The focus on this design was the cockpit and the laying out of the running rigging so that one person could easily sail the boat. There is nothing revolutionary here except the fact that most cruiser/racer types put more emphasis on interior comfort and this resulted usually in tight, cramped cockpits. The Alerion would be tiller steered with the mainsheet led to a barney post in the center of the cockpit.

The rig is fractional with swept spreaders and a self-tacking jib. In 1994 Garry Hoyt became involved with the project at the invitation of Everett Pearson, president of TPI. Hoyt worked to refine the boat, adding his Hoyt jib boom. I really like the Hoyt boom. It is a huge improvement over the self-tacking track just so long as you don’t mind this big pipe living on your foredeck. I could live with it. The SA/D is 20.97 and that’s enough to keep you ghosting along in the light stuff. Hoyt also changed the keel to a fin and bulb. I think that this sail area coupled with a healthy ballast-to-displacement ratio of 168 will result in a stiff and fast ride.

I couldn’t begin to tell you the boats that this design inspired. In fact, I think the Alerion Express gave birth to a type—daysailers—that today is well established and does not mean what it meant 30 years ago.The gentle sweep of the sheer is balanced by moderate overhangs and freeboard that is low by today’s standards. Beam is narrow, and the hull shape looks to be moderate in all aspects. Below the waterline the design shows a modern fin keel and a semi-balanced spade rudder. To me this is the most exciting mix of design features. Take an attractive, classic topsides look and blend it with performance characteristics below the waterline. The result is a boat that has the romance of yesterday and the performance of today.

The Alerion-Express is currently being built by Tillotson-Pearson in Rhode Island. All gear is first rate and the overall look is one of a sophisticated and refined small yacht.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Buyer should assume that items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht, and should instruct his agents, or his surveyors to investigate such details as the buyer desires validated. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes, and withdrawal from market without notice.