Mary Edwards
36' 1976 Roughwater 36
$55,000.00
Last Updated: 2025-04-29
Mary Edwards is a very clean and well-maintained vessel. She is a terrific coastal cruiser with proven handling characteristics in rough seas. She’s been repowered with a Cummins Diesel with only 178 engine hours, and also includes a recently installed Kestrel-140 12v diesel generator! She has great light and visibility making for a great family yacht, bay and delta cruiser, or live-aboard. She comes with thorough documentation and manuals.
Make: Roughwater
Model: 36
Year: 1976
Length: 36ft
Name: Mary Edwards
Hull Material: Fiberglass
Engine/Fuel Type:
Located In: San Rafael, CA
- Details
- Dimensions
- Engines
- Tanks
- Accommodations
- Category: Power
- Class: Motor Yachts, Cruisers
- Designer: Ed Monk & Sons
- Length Overall: 35.75 ft
- Length at Waterline: 32 ft
- Beam: 11.42 ft
- Draft: 3.33 ft
- Displacement: 14,000 lb
- Headroom: 6.33 ft
Engine 1
- Make: Cummins
- Model: 6BT5.9
- DriveTransmissionDescription: Stern
- Fuel: diesel
- EnginePower: 180|horsepower
- Type: Inboard
- Hours: 178
- Fuel Tank: 170|gallon
- Water Tank: 80|gallon
- Holding Tank: |
- Cabins: 3
- Heads: 1
Additional Descriptions
Mary Edwards is a very clean and well-maintained vessel. She is a terrific coastal cruiser with proven handling characteristics in rough seas. She’s been repowered with a Cummins Diesel with only 178 engine hours, and also includes a recently installed Kestrel-140 12v diesel generator! She has great light and visibility making for a great family yacht, bay and delta cruiser, or live-aboard. She comes with thorough documentation and manuals.
Designed by Ed Monk & Sons for all-weather seaworthiness with a cruising speed of 13 knots, the Roughwater 36 features a semi-displacement hull with a full keel for comfortable, stable performance. Her fiberglass specifications were drawn up by Monk to withstand the severe conditions encountered in the Pacific Northwest. While her hull is a layup of fiberglass mat and woven roving, her deck and superstructure are of marine grade plywood and teak.
The high strength hull is a molded one piece fiberglass reinforced laminate, with all stringers, bulkheads and interior structural hull components fiberglass bonded to the hull for added strength.
The heavy duty hull construction process was done by hand lay up method with eleven alternate layers of mat and 24 ounce woven roving on the bottom, fourteen on the keel.
Interior and exterior trim is in teak, including the solid teak cabin sole. The teak decking is laid in Thiokol type sealer.
In early years cabins and under deck construction are mahogany and mahogany marine plywood.
All hardware and fittings are either bronze or stainless steel. Windows and port lights are ¼" safety glass.
Accommodations on Mary Edwards are arranged to sleep six in three separate cabins. Her forward cabin is fitted with a V-berth arrangement with filler to make into a double plus a pair of hanging lockers and drawers under the berths. Her main cabin houses an in-line galley with range, refrigerator, sink, and the dinette that converts to form a double berth. Lockers and drawers are built into the dinette unit. An enclosed head with marine w/c and lavatory occupies the balance of the main cabin area. A 115v shore power system and a pressure water system with heater are part of the standard equipment package.
Her salon/pilothouse is equipped with a chart and instrument area, and a fold down pilot seat. A settee, arranged along the port side opens to form a 6' 10" x 4' 2" double berth. A sliding door opens to her eight foot long, teak soled cockpit which is provided with a seat/deck locker and a pair of lazaretto access hatches.
Power is provided a recently installed 185 hp Cummins 6BT5.9 diesel which gives her a range of 500 miles at cruising speed (13 knots) and 800 miles if the speed is reduced to about 7.5 knots.
The generator is a Kestrel-140 12v providing extremely economical and reliable power for battery recharging and all systems operations.
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Buyer should assume that items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht, and should instruct his agents, or his surveyors to investigate such details as the buyer desires validated. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes, and withdrawal from market without notice.