LIGHTWAVE
50' 1990 Adams Open 50
$69,000.00
Last Updated: 2025-04-29
This 1990 custom Joe Adams designed race boat was built by Redford Yacht Design in Australia. LIGHTWAVE was built for the 1991 BUC singlehanded Round the World Race and placed second in Class II. She is made from aluminum with a narrow beam and water ballast to keep her upright and sailing fast. A minimum cruising interior has been installed, but she still sails like the wind, easily hitting 14 to 15 knots and up to the mid-20's if you push her.
LIGHTWAVE comes with a full set of sails and is ready to take her next owner around the world fast.
Make: Adams
Model: Open 50
Year: 1990
Length: 50ft
Name: LIGHTWAVE
Hull Material: Aluminum
Engine/Fuel Type:
Located In: Sausalito, CA
- Details
- Dimensions
- Engines
- Tanks
- Accommodations
- Category: Sail
- Class: Racers, Sloop, Racers and Cruisers
- Keel: Bulb Keel
- Length Overall: 50 ft
- Length at Waterline: 47.5 ft
- Beam: 12 ft
- Draft: 10 ft
- Displacement: 20,000 lb
Engine 1
- Make: Yammer
- Model: 3GM
- Fuel: diesel
- EnginePower: 30|horsepower
- Fuel Tank: 75|gallon
- Water Tank: 75|gallon
- Holding Tank: 15|gallon
- Cabins: 3
- Heads: 1
Additional Descriptions
Entering from the companion, there is a full function, forward facing navigation station with complete set of electronics. On either side of the companionway are quarter berths. Forward of the nav station ion the port side is a dinette that seats up to 6. On the starboard side is the galley. Forward of the salon water tight bulkhead is a sail storage area with two pipe berths and the head. Forward of the next watertight bulkhead is a v-berth that can be used for sleeping.
The hull and deck are solid aluminum with white paint. Bulkheads and stringers are all aluminum.
The vessel is set up with an aft cockpit, hard dodger and large flush deck. All lines can are led aft and can be easily singlehanded.
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Buyer should assume that items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht, and should instruct his agents, or his surveyors to investigate such details as the buyer desires validated. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes, and withdrawal from market without notice.