ELYSE
31' 2022 Pacific Seacraft 31
$599,000.00
Last Updated: 2025-04-29
ELYSE was delivered new to its Sausalito, CA based original owner in May of 2024. Due to the manufacturers delayed build / delivery schedule, the new owners current health condition is creating a unique opportunity to acquire a new yacht that is fully loaded at a great price.
ELYSE has never been slept in, her toilet has never been used, her stove and oven has never been used etc. etc. She still has the "new-boat smell"
Her Yanmar 3YM30AE engine has 10 hours on her. She features a SidePower Bow Thruster, Solar System and a great Navigation Electronics configuration, along with a long list of upgrades
The price to order a new yacht from the builder configured identical to ELYSE is $735,000.
Call today to evaluate this unique opportunity.
Make: Pacific Seacraft
Model: 31
Year: 2022
Length: 31ft
Name: ELYSE
Hull Material: Fiberglass
Engine/Fuel Type:
Located In: Emeryville, CA
- Details
- Dimensions
- Engines
- Tanks
- Accommodations
- Category: Sail
- Class: Cruisers, Sloop
- Keel: Fin Keel
- Designer: W.I.B. Crealock
- Builder: Pacific Seacraft - Washington, North Carolina
- Length Overall: 31.83 ft
- Length at Waterline: 24.17 ft
- Beam: 9.83 ft
- Draft: 4.92 ft
- Displacement: 11,000 lb
- Ballast: 4,400 lb
- Headroom: 6.08 ft
Engine 1
- Make: Yanmar Diesel
- Model: 3YM30AE
- DriveTransmissionDescription: Direct
- Fuel: diesel
- EnginePower: 30|horsepower
- Type: Inboard
- Year: 2022
- Hours: 10
- Fuel Tank: 23|gallon
- Water Tank: 65|gallon
- Holding Tank: 30|gallon
- Cabins: 2
- Heads: 1
Additional Descriptions
- Hand laminated with vinylester resins in hull for superior blister resistance (10 year osmosis warranty)
- Hull reinforced with structural E-glass for added stiffness and impact resistance
- Standard hull is molded in premium ISO-NG gel coat, standard color is oyster white.
- Contrasting boot and sheer stripes: teak rub-strake.
- Hull and deck flanges bedded in polyurethane adhesive and fastened with stainless thru-bolts on 6" centers
- Deck has molded in contrasting non-skid pattern, molded in bulwarks for added safety
- 316 Stainless steel chain plates and backing plates are double caulked and thru-bolted to hull sides
- Rudder supported by high strength manganese bronze gudgeon on a reinforced skeg
- Ballast - External one-piece lead casting with 1" stainless steel keel bolts.
- Keel to hull joint is bedded in thickened epoxy
- Interior- structural interior module is bonded into hull with structural biaxial E-glass; Primary bulkheads are bonded into hull and deck with biaxial tabbing.
- B&G Zeus 3S Multifunction Display
- B&G Halo 20 Digital Radar
- B&G NAC-2 Below Deck Autopilot
- B&G V-60B VHF w/ AIS Transponder & AIS Slim Antenna
- B&G Remote Mic
- B&G WS-320 Wind Sensor w/ interface
- B&G Triton 2 Multifunction Displays (2)
- B&G DST-810 Tri-Ducer Thru Hull Transducer - Depth / Speed
- B&G Rudder Reference Indicator
- B&G Smart Rate Compass
- NEMA 2000 Hub
- Scanstrut ScanPods for MFD & Sailing Instruments
- 2 - 40.2 two speed self-tailing Andersen stainless winches
- 2 -20 single speed self-tailing stainless Andersen mainsheet and halyard winches
- Custom Selden/AntalTM mainsheet traveler with blocks in cockpit
- Deck organizers and foot blocks;
- Spinlock rope clutches
- Two stainless steel 10" bow mooring cleats with 4" oval hawse pipes, two 10" spring cleats amidships
- Two stainless steel 10" stern cleats with chocks
- One stainless steel anchor deck pipe on foredeck and one aft for stern anchor
- All stainless steel hinges, hasps, deck fills, etc.
- All cleats, winches, turning blocks, pulpits, and stanchions have backing plates double-caulked with polyurethane
- Four stainless steel handrails.
- Large opening Vetus deck hatch
- 10 stainless steel portlights with screens (screens install from interior)
- Two teak dorade style ventilators with stainless steel cowls and Vetus screw down mushroom vents
- Fiberglass sea hood; teak trimmed companionway; Teak sliding hatch and solid teak drop boards
- Stern chain locker to port with stainless steel deck pipe
- Stern mounted stainless steel swim ladder with teak treads
- 32" high double rail pulpits at bow and stern (1-1/4" OD) with running lights; wrap-around stern pulpit extends forward to gates enclosing cockpit
- Stainless steel boarding gates, port and starboard with lifelines
- Double lifeline 32" stanchions with bare stainless steel lifelines per ORC specs
- Stainless steel bow sprit with bobstay; two anchor rollers; locking pins; divided bow chain locker for two anchor rodes
- 5 coats Epifanes "Rubbed Effect" varnish on al interior Mahogany
- 6-1" headroom with teak and holly sole throughout cabin area; hatches are banded in solid teak
- Almond laminate cabin house sides; white matte finish below counter height with Mahogany cabinetry above
- Solid mahogany panel cabin doors and solid drop doors
High resiliency foam cushions with Ultra-Leather fabric - Underside of deck is insulated for acoustic dampening and to reduce condensation
- 6-6" long and 78" wide double "V" berth; shelves both sides; teak drawers under berth
- Gimbaled Force-10 stainless steel 2-burner propane stove with broiler and thermostatic oven
- Stainless steel safety bar/towel rack
- 3.5 cubic foot icebox with poured foam insulation and hinged lid with manual evacuation pump
- Under-mount polished stainless steel double sink with chrome faucet and back-up fresh water foot pump
- Storage lockers and drawers for provisions, dishes and cutlery
- Corian countertop with custom fitted cutting board
- 6'-10" settee berths port and starboard with lockers below and storage bins behind
- Mahogany storage cabinets and book shelves over settees both port and starboard
- Mahogany chart table with tilt-out chart storage; icebox is located under chart table
- Two Mahogany overhead handrails and two hand holds at companionway
- Slide-out Mahogany and laminate dining table stows beneath "V" berth
- Enclosed head with stainless steel sink set in Corian counter; chrome pull-out faucet/shower
- Mahogany toiletries cabinet; storage locker; mirror and separate wet hanging locker aft
- Two Mahogany drawers and one drop door storage locker
- 6'-6" long 72" wide double aft quarter berth to port
- Hanging locker with louvered door and aromatic cedar lining to starboard
- Hot / cold pressure freshwater system; 6 gallon 110v hot water heater with and engine heat exchanger
- Chrome galley faucet, back-up foot pump and combination faucet / hand shower in head,
- Two water tanks with inspection ports, approx. 65 gallons total
- Bronze thru-hull fittings with U.L. approved bronze seacocks below the waterline and bronze ball valves above the waterline. All thru-hull fittings are double hose clamped
- Marine head with Y-Valve, 16 gal. holding tank, electric overboard pump-out and deck shore side pump-out
- 25 gpm Whale manual bilge pump in cockpit operable by helmsman
- Electric main bilge pump with float switch, electric shower sump pump w/ manual switch
- Yanmar 3YM30AE, 3 cylinder, 30 hp diesel engine with fresh water cooling and 120 amp alternator
- Yanmar digital B-Panel in cockpit with tachometer; engine condition indicators; alarms and hour meter
- PSS shaft seal
- Removable 21 gal (87ltr.) fuel tank with gauge and cleaning port
- Racor fuel filter with water separator; Bronze sea water strainer; Aqua lift muffler system
- Tilt up, insulated engine box provides excellent engine access and quieter running
- 110 Volt AC shore power svstem with GFCI breakers.
- 30 amp battery charger
- AC/DC master control panel with AC ammeter, DC voltmeter, polarity test circuit, five AC circuit breakers, DC ammeter, battery condition monitor, and nine DC circuit breakers. Panel is hinged
- Tinned copper DC wiring throughout; 4 gauge lightening ground to keel
- Two AGM group 31 marine batteries (105 amp hours each)
- Blue Sea parallel battery switch
- LED interior lighting package: four dome lights, six reading lights
- One adiustable LED chart light at navigation station
- RG-213U coaxial antenna cable led from masthead to navigation station
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Buyer should assume that items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht, and should instruct his agents, or his surveyors to investigate such details as the buyer desires validated. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes, and withdrawal from market without notice.