CARPE VENTUM
34' 2000 Hallberg-Rassy 34
$149,000.00
Last Updated: 2025-04-29
CARPE VENTUM is spectacular example of a 34' Hallberg Rassy sloop that has been lovingly maintained by its original owner. 500 of these yachts were built in a production run that spanned from 1990 until 2005. Rarely do these come on the market because owners become so attached to them that they keep them for years.
With her efficient keel and sturdy fractional rig she has great sailing characteristics that are not usually found in a fine cruising yacht. HR 34's have won many races, even though they offer great sea worthiness and comfort for blue water cruising.
The large aft cockpit is well protected by the trademark Hallberg-Rassy wind screen. The dodger can be folded back in nice weather. All halyard and reefing lines are controlled from the cockpit.
Down below the layout is excellent with two nice staterooms and a dinette that converts. The yacht has a central diesel heating system which will keep the yacht warm and dry underway or at anchor. The fit and finish is top notch with hand made mahogany cabinetry, fine doors and louvered fronts. The engine installation has good air intake and is well insulated for sound.
The maneuvering ability is excellent, as well as the sailing qualities. HR 34 has the touch of a racing boat, heels, speeds up with a comfortable weather helm and good response on trimming. The hull and deck of the HR 34 are built under constant supervision of the Lloyd's Register of Shipping, and a Lloyd's certificate is supplied with each boat.
Call today to inspect this fine yacht.
Make: Hallberg-Rassy
Model: 34
Year: 2000
Length: 34ft
Name: CARPE VENTUM
Hull Material: Fiberglass
Engine/Fuel Type:
Located In: Emery Cove-Our Docks, CA
- Details
- Dimensions
- Engines
- Tanks
- Accommodations
- Category: Sail
- Class: Cruisers, Daysailers, Sloop
- Designer: German Frers
- Builder: Hallberg Rassy
- Length Overall: 33.67 ft
- Length at Waterline: 30.83 ft
- Beam: 11.17 ft
- Draft: 6 ft
- Displacement: 11,684 lb
- Ballast: 4,630 lb
Engine 1
- Make: Volvo Penta
- Model: MD 2030
- DriveTransmissionDescription: Sail
- Fuel: diesel
- EnginePower: 30|horsepower
- Type: Inboard
- PropellerType: 3 Blade, Bronze, Folding
- Year: 2000
- Hours: 1085
- Fuel Tank: 42|gallon
- Water Tank: 55|gallon
- Cabins: 2
- Heads: 1
Additional Descriptions
The hull and deck of the HR 34 were built under constant supervision of the Lloyd's Register of Shipping, and a Lloyd's certificate is supplied with each boat. The production run was over 500 yachts between 1990 and 2005. The hand lay-up fiberglass method provides insulation above the water line against heat and cold. Construction also includes strong floor reinforcements and a deep bilge. The boat has a very efficient bolt-on lead keel with 10 stainless steel bolts. Deck and coachroof areas, and also the cockpit, are of sandwich construction, laminated to the hull to form a one-piece construction. The large cockpit is well-protected by a windscreen made of tempered glass and a sprayhood. The middle section of the windscreen opens. In the stern is an integrated swim platform with a folding ladder. The cockpit floor and side trims are all in top quality teak. On deck the HR34 also has strong cleats forward and aft; spring cleats and fittings for spinnaker blocks; there is an instrument console above the sliding hatch for electronics, and a compass at the wheel. It has a stainless steel rudder shaft with roller bearings, and wheel steering. The rigging consists of a fractional rig by Selden with a strong backstay tensioner for trimming the mast. Running backstays are not necessary. Halyards and lines are led into the cockpit. The interior is tastefully finished in rich mahogany with a matte silk varnish. There is no visible fiberglass. Detachable carpets have press studs to avoid movement, and floors are teak and holly with satin varnish. The salon has two sofas. The L-shaped sofa has lockers above and stowage space underneath. There is a strong saloon table, galley and a chart table with space for instruments. The forward and aft cabins both have lockers above and generous stowage below their berths.
Four adults can share the 2 staterooms, and 2 more can sleep on the two settees in the main cabin. The backs of the two settees flip up to accommodate an additional 2, all with lee cloths to keep them secure. The forward stateroom has a full width v-berth, and the aft has an exceptionally wide and long double berth. Athough there is a teak and holly sole, it is protected by a carpet (new 2012) custom cut to fit the cabins and snapped into place. The blue high end upholstery on the settees and nav bench match the blue in the carpet. The mahogany table has leaves that flip up to accommodate more diners, and bottle storage within. The ample forward facing nav station has custom built drawer storage, and a cubby for cell phone charging. Off white curtains are on the ports throughout the boat, and there are skylight curtains as well. There are inspection openings in the sole, and an attractive headliner accentuated with mahogany strips. The entire interior is mahogany with a matt silk finish.
The galley is to port, opposite the nav station and aft of the L settee. The galley features a stove and oven, a double stainless steel sink, and a Danfoss refrigerator. There are drawers, storage areas, and a clever pull out cutting board as well as a flip-up mahogany board to extend the counter top.
The large rectangular china sink is the first thing you see when entering the head. There is a watertight shower stall with teak grating, a manual head, large mirror and two opening ports.
Fresh water cooled 3-Cylinder Volvo Penta MD 2030 with sail drive and two blade folding prop. The sail drive unit was serviced at the last haul out in January 2015. The engine room has been carefully sound insulated, and all parts are easily accessible.
Webasto Air Top 3500 diesel heater. There are outlets in the master stateroom, salon, aft cabin and heads.
The hull is white gelcoat, with a distinctive dark blue gelcoat stripe. Hand laid, and insulated above the water line, it has an integrated rub strake with a brass strike plate. "CARPE VENTUM" has an integrated swim platform with a folding stainless steel and teak ladder, and a windscreen with handholds and a new canvas dodger that fits the windscreen. The mid section of the windscreen opens for ventilation. There is an instrument console above the sliding hatch.
- Windlass with controls at bow and cockpit
- Genoa tracks with adjustable cars
- Stainless steel rudder shaft with roller bearings
- Wheel steering with leather cover
- Two dorade vents in the coach roof
- Forward chain lockers for fenders, lines and chain
- Stemhead roller for anchor
- Cockpit table with fitted stowage in lazarette
- Harness fittings in cockpit
- Teak deck, toe rail, trim, cockpit sole, cockpit locker tops
- Stainless steel bow pulpit, stern rails, and stanchions with double life lines
- Starboard, port and stern boarding gates
- Shower on swim platform
Simple design and finish belie the bluewater quality of this versatile cruiser
When most North Americans think of Hallberg-Rassy yachts they conjure up visions of husky, 40-foot and up center-cockpit world cruisers. Yet one of the company's most successful models, the HR 34, features an aft cockpit, a nimble fin-keel hull shape and a fractional rig. Don't get the wrong idea, the 34 does have a lot in common with its robust sisterships, including intelligent construction techniques, excellent engineering and a German Frers design pedigree. Introduced in 1990, the 34 remained in production until 2005 with more than 500 boats launched, making it one of the company's best sellers.
Hallberg-Rassy has been building boats on the west coast of Sweden for 50 years, just not always as one company. Cristoph Rassy and Harold Hallberg were never partners. In fact, they were competitors until Rassy purchased retiring Hallberg's yard in 1972. Since then, the firm of Hallberg-Rassy has carved a coveted niche in the sailboat industry. There is no disputing that it's in the top tier of sailboat manufacturers. Hallberg-Rassys, with their trademark windscreens and hard tops are fixtures at cruising crossroads the world over. The company builds about 170 yachts a year and the wait time for a new model can be up to a year. That's why, if you're in the market for a mid-30s Hallberg-Rassy, it pays to look at used boats. And pay is the right word because Hallberg-Rassys don't come cheap. You will likely need to spend more than $150,000 to purchase a used HR 34. But then again, you get what you pay for.
First impressions
The HR 34 is refreshingly versatile. It is certainly a capable bluewater boat with many documented ocean crossings to its credit but it is also right at home as an occasional PHRF competitor and a family cruiser. A 1995 model was recently hauled out at the boatyard just across the street from my house. It has an attractive profile. The sheerline is subtle, accentuated by a wide covestripe and a healthy amount of freeboard. The bow entry is raked but the overhang is still moderate. The reverse transom helps extend the LWL to 28 feet, 6 inches. The overhang ratio, or the LWL as a percentage of the LOA is around 16.5 percent, typical of many of Frers' best designs. The fin keel has a shorter cord than you might guess for a bluewater boat and the rudder is, more or less, freestanding, although the top bearing edge is nicely flared into the rocker section. The displacement of 11,684 pounds leans toward the heavy side of moderate and the lead ballast of 4,630 translates into a 35-percent ballast-to-displacement ratio. Sloop rigged, the working sail area is 592 square feet, although a more accurate number is with the common 125-percent furling genoa, or 667 square feet.
Construction
I must confess, I am partial to Scandinavian-built boats. For the most part these boats are highly capable, well thought out and finished in a simple yet elegant if understated way. Nothing screams at you when you examine the HR 34, there's just a quiet sense of well-executed quality as you make your way around on deck and below. The hull is solid fiberglass although the sections above the waterline are foam insulated, so in this way the hull is cored. The hull is well supported by a grid system of fiberglass floors and stringers. There is a deep bilge sump, a good feature on any boat but especially an offshore cruising boat.
The lead keel is attached on a diagonal to a short stub with 10 stainless steel bolts. The battle about whether internal or external ballast is better continues to rage. I like internal ballast. However, more and more boats are fitted with external ballast and it certainly is well proven. It also streamlines the manufacturing process and allows for more flexibility in keel shapes. The large fiberglass rudder is wrapped around a beefy stainless steel stock with heavy-duty roller bearings.
The hull-and-deck joint is mechanical and chemical and fiberglassed over to prevent leaks. In fact, Hallberg-Rassys are well known for their lack of leaking. The hull and coachroof sections are composite, cored with either balsa or foam. The mast is deck-stepped, which makes perfect sense on a 34-foot boat. This eliminates a leak source and allows for easier stepping.
What to look for
Hallberg-Rassy continually upgraded the 34 during its long production run and several important changes were made along the way. The first boats did not have the fixed windscreen. Also, in 1994 the transom was opened to allow for a molded swim platform. Boats without this feature are less desirable on the used market. The cockpit was shortened in the mid-1990s, which of course means that the interior was extended. The cockpit is still good sized, with seats longer than six feet for stretching out on.
The interiors of early boats features a long, straight galley opposite the settee, which created more room for the aft cabin but was not practical for cooking while underway. Later boats featured an L-shaped galley aft to port. Other small changes were made and these are noted on the Web site, www.hallberg-rassy.se. Many of these upgrades were to comply with new European Union rules to qualify as a Category A boat, implying that it is capable of unlimited voyages.
If the HR 34 you are inspecting has wheel steering, check the installation carefully. Most 34s came with tiller steering and the pedestal and wheel were typically a retrofit. Incidentally, the standard tiller boats have a lot more cockpit space. Also, be sure to check the seal around the lower unit of the saildrive transmission. The standard engine was the Volvo MD 2030, and included a saildrive transmission. These lower units often corrode. Also, HRs were not immune to hull blisters, especially when first exposed to tropical waters, but it is not a widespread problem.
On deck
The HR 34 cockpit is fairly spacious and surprisingly comfortable. During the production run changes were made to make the cockpit more comfortable, including softening the angle of the seat backs. Visibility from the helm is adequate, but if the windshield is old and clouded, it can be hard to see when sitting. Lewmar deck hardware and hatches were often used and the quality was excellent. The mainsheet traveler spans the cockpit bridgedeck, which is nice for controlling the main but inconvenient for dropping below. Some boats have retrofitted midboom sheeting arrangements; be sure to carefully inspect how this was done.
Double-spreader Seldon spars were standard and these invariably hold up well. The 34 is fractionally rigged, but only just. It's seven-eighths rigged, which has always made me wonder, why bother? At least you don't need running backstays. A sleek spinnaker arrangement, with the pole stored on the mast, was standard. Most boats came standard with all sail controls led aft through jammers and a single-line mainsail reefing system. The stainless steel stemhead fitting is more than adequate with a single roller. The anchor locker is external and quite large. A small molded bulwark and an intricate molded nonskid make it safe to navigate the deck even when it's blowing.
Down below
Anyone familiar with Hallberg-Rassy will associate its interiors with a matte-finished, red-brown mahogany. The workmanship is excellent as every joint is made to last, but the overall atmosphere is spare. There's nothing ornate about the HR 34's interior, and that's fine with me. I really like the way these boats are finished. There isn't any visible fiberglass but at the same time the extensive use of wood doesn't feel oppressive. It's like a Swedish cottage, and of course that conjures up all sorts of images better left unsaid.
The interior plan also changed along the way. When the cockpit was shortened, the interior became user-friendly. Although the aft bulkhead was extended just 10 inches, that translates into a lot of interior volume. Most boats on the used market today feature an L-shaped galley to port. It is small but highly functional, with two deep sinks, a stove and oven, standard 12-volt fridge and clever storage lockers for trash, cutting boards and cutlery. It would be challenging to stow gear and provisions for an ocean crossing, but that can be said about almost any 34-foot boat. The aft cabin is accessed from the galley and includes a good-sized double that runs fore and aft. Many new boats have athwartship berths that are not very useful while underway. The aft cabin also has a big hanging locker and additional storage under the berth.
The head is opposite the galley and includes all the usual accoutrements. Amidships, or actually aft of amidships, is the perfect spot for a head on a small boat, much better then squeezing it behind the V-berth. The nav station and electrical panel are forward of the head. The saloon features an L-shaped settee to port, at least most boats do; as mentioned earlier, the first boats had the galley running either side of the saloon. The table is small but opens up to accommodate as many people as you'd ever want in a 34-foot boat. The forward V-berth cabin is spacious and includes a hanging locker, with drawers opposite and bookshelves above the bunk.
It is often the details that separate a good boat from an average one and that's the case with the Hallberg-Rassy 34. Small features like a diesel interior heater, backup manual pumps and efficient lightning came standard on the 34. The more you probe around these boats the more you like them, and that is not always the case with other boats.
Engine
The standard power plant for the HR 34 is the Volvo Penta MD 2030, a 20-horsepower diesel with a saildrive transmission. Readers know that I don't particularly like saildrive lower units as they are prone to corrosion and more vulnerable to collision. So why do manufacturers use them? They have advantages, the foremost being that they don't require as much space as a straight transmission with a prop shaft, stern tube, stuffing box, strut and cutlass bearing. Be sure to check the lower unit on any used boat with a saildrive for signs of corrosion. Also carefully check the sealing gasket.
Access to the engine on the HR 34 is from behind the companionway and it's adequate. The engine was reported to have a bit of vibration, but this was corrected at some point during the production run. These engines are extremely reliable and very fuel-efficient. Owners report that when motoring at 6 knots in flat seas the engine uses around half a gallon of fuel per hour. The fuel tank capacity is 155 liters, or roughly 40 gallons.
Underway
One of the best reasons to consider a Hallberg-Rassy 34 is its lively sailing performance. This is not a clumsy cruiser just claiming to be a good performing boat, it is a sailboat first that also just happens to be a nice cruising boat. Just look at the hull shape. There is enough of a forefoot to reduce the tendency to pound but not too much to slow the boat down. The balanced rudder is well aft and provides good control even while running before big seas.
The powerful seven-eighths double spreader rig delivers plenty of horsepower. Frers' speed diagram shows the 34 capable of reaching at 8-plus knots without a spinnaker, and near 9 when the chute is flying and the gods align. Upwind performance is more than adequate with speeds of 6-plus knots in moderate breezes and seas. Polars of course can be misleading in the real world, but the real world evidence supports the fact the HR 34 is a sweet sailing boat. My friend, Crister Leferdahl, crews on a 34 that is actively campaigned in Stockholm and he tells me they have done very well during several seasons of hardcore racing.
Conclusion
The HR 34 is an expensive late-model used boat with prices ranging from $150,000 to more than $200,000. It is also a high-quality, versatile boat that is capable of crossing an ocean or racing across the bay in style. I have always admired boats that are simply at home on the sea, and that's the best definition of the Hallberg-Rassy 34.
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Buyer should assume that items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht, and should instruct his agents, or his surveyors to investigate such details as the buyer desires validated. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes, and withdrawal from market without notice.