ADA is a well equipped, Robert Perry designed, Norseman 447 Center Cockpit Cutter that is ready to take you cruising now! She has received continuous upgrades and maintenance from her knowledgeable owners. Call now to see this well priced, nicely equipped Norseman 447!
The Norseman 447 Center Cockpit Cutter is a very spacious well designed performance cruiser from the famed Robert Perry and Ta Shing Yard. Ta Shing is considered to be one of the best boatyards in Asia and one of the best in the world. Perry's Norseman 447 design is widely considered one of his best offshore/bluewater boats.The boat was designed as a no-compromise offshore passage maker capable of safe comfortable ocean passages while easily making 180 miles per day with a short-handed crew.
Owners cabin is aft with king size bed
Aft head with SeaLand VacuFlush fresh water toilet and separate stall shower
VIP Cabin fwd with large V-Berth
Forward head with Raritan PH Superflush head (new 2016)
Starboard settee in salon converts to bunk beds
Port side dinette converts to double berth with table lowered
Ventilation fans throughout
2 Zones of NovaCool Marine 110V Air Conditioners (As-Is never used or tested)
Force 10 3-burner + stove / Grill (new 2011)
2 x 20lb LPG tanks
Large capacity fridge (top and front access) and separate independent freezer with separate compressor that can also double as a second fridge (equally large)
Fresh water foot pump double sinks + fresh water pressure (hot + cold)
Filtered water spout
Tasco Marine BBQ + 5lb LPG tank (on deck)
3 stainless water tanks (50 gl + 2 x 25 gl)
Ventilation fan
Fiberglass (hull professionally painted with Awlgrip in 2016, bottom with Interlux Micron 66 in 2019)
Net 16 tons Gross 18 tons Length 44.6 ft
Width 13.0
Depth 5’ 10” (1.9m) shoal draft fin keel LWL 37.6
Displacement 25,000 lb
Ballast 12,000lb
Westerbeke 64A (64HP) with 1400 hours (new 2004, extensive overhaul 2019)
Dual feed-return Racor 75500FGX10 with custom dual-tank manifold system (all new 2021)
Velvet Drive transmission 10-04 2.50:1
PYI Drip-less packing gland (new 2016)
MaxProp 3-blade folding propeller
1 ¼” shaft (new 2012)
110 Ah Alternator
2 x 40 gl stainless diesel tanks each with Maretron TLM100 tank level monitors
8 x 5 gl gerry-cans on custom stainless deck mounted rail (4 per side)
Westerbeke 7.6 BTD-614 (7.6Kw) 110V generator (extensive work done in 2021)
Furuno Navnet 3D MFD8” Maxsea (pedestal) 3-pod Raymarine i70 (c/p)
i70 Raymarine i70 Display (pedestal)
Furuno 2Kw Radar
Radar reflector
Simrad AP25 autopilot (navstation) HLD2000 hydraulic drive
Simrad AP16 autopilot control (c/p pedestal)
Simrad WR20 Remote control for A/P
Simrad AI50 AIS (transmitter/receiver with separate VHF antennae)
MX200 GPS navigator
Maretron GPS200
Maretron DSM250 Color N2K display (navstation)
Maretron DST110 depth, speed, temperature (new 2019)
Maretron WSO weather station
Maretron USB100 gateway
Interphase forward looking sonar
Garmin wind anemometer (new 2020)
Dell Optiplex 780 PC with Maxsea TimeZero Navigator V3 license
Cappuccino 12V backup PC
ICOM IC-M700PRO SSB/HAM + AT-130 tuner
Pactor PTC-II (with software upgrade)
Raymarine Ray55 + remote handset in c/p (nav station)
Raymarine Ray49 in c/p (second independent vhf)
West Marine Handheld VHF
KVH Trackphone (as is, current owner never used)
Sony Xplod CD/radio/USB
Westerbeke 7.6 BTD-614 (7.6Kw) 110V generator (extensive work done in 2021)
Superwind wind generator
2x Solar Panels – output 18W Galvanic Isolator
House bank Lifeline 720Ah AGM (new 2021) (2x8DL and 2x4CT)
Starter battery Lifeline AGM 250 CCA (new 2020)
Xantrex SW2012 (true-sinewave) Inverter Charger (new 2020)
APC Electric Monitor
Balmar MC-612 smart regulator
Battery Isolator
BEP DSVR
Maretron DCM100 N2K battery monitor
Professional Mariner Dura 50AMP charger (spare)
Alpenglo lights throughout
Doyle Stackpack (new 2018)
Mainsail fully battened, 3 reefs (new 2011, sail serviced and covers restitched by Hogan 2021)
Genoa 110% (new 2011, sail serviced and covers restitched by Hogan 2021)
Staysail (storm cloth orange) (new 2011)
Asymmetric spinnaker with sock and ATN tack
Selden anodized keel stepped mast (brand new mast in 2011, converted from in-mast furling to full batten main for better sailing performance)
Mast sealed with Spartite (new 2019)
New chainplates (2009), rebed 2021
Standing rigging (new 2011)
Selden rodkicker
Selden Spinnaker Pole
All Stalock standing rigging (new 2011)
Almost all new running rigging 2011
All winches fully serviced 2021
Electric C/P Mainsail halyard + mainsheet 43 Electric winch
Mast 2 x 2-speed 43; 1 x 14 reefing winch
C/P 2 x 2-speed 40 - Staysail + preventer
C/P 2 x 2-speed 55 Genoa
C/P 2 x s-speed 40 running-back + furler
All Lewmar clutches
Spectra 380C Watermaker 16gl/h (as is, working fine when pickled in 2017, may need service and new membrane)
3 Fresh Water Tanks, all stainless
50gl with Maretron TLM100 water maker feed 2 x 25gl gravity fed from 50gl tank
5 gl water heater
Fresh water pressure system
Deck washdown (fresh or sea water)
2 x sump pumps
Holding tank with manual or deck discharge
Non-skid decks (no teak decking! Non-skid works well but is visually in fair condition)
Harken System IV furler (genoa)
Harken Cruising furler (staysail)
Storage for 8 Gerry-cans (7 Diesel, 1 Gasoline)
4 lazarettes
Dyneema lifelines (new 2021)
AquaSignal lights (Tri-color and anchor LED)
Foredeck light
Spreader lights
Aft deck light
2 x Shadetree canopies
5-prisms (one spare)
deck washdown (salt or freshwater)
Aft integrated stainless steel folding swim ladder
Hard dodger with integrated lighting and opening center window
Covered cockpit with bimini (new bimini 2021)
Edson Pedestal
Suunto D-135 compass CPT Autopilot II (spare)
Stainless steel stern davits for dinghy and solar panels
Outboard crane on aft deck for raising/lowering 10HP Mercury outboard
AB 2.7 Dinghy (works fine but Hypalon fabric is near end of life)
Mercury SeaPro 10hp
Tohatsu 3.5hp (as is, current owner never used)
Additional fuel – 1 5-gl gerry-can + 1 x 2 gl gerry-can
Chocks on deck for dinghy storage on passages
Removable shore wheels for dinghy
66lb Bruce Anchor
G43 200 ft of chain + 200ft Yale Braided anchor rode (all new 2020)
Maxwell 2200 VWC windlass (dual control: foredeck foot switches + cockpit) (new windlass motor 2021, not a rebuild)
Fortress FX-23 spare anchor (rode + chain)
McMurdo G5 406 GPS EPIRB
ACR PLB-375 ResQLink EPIRB (new 2016)
Rule 3700 gl/h bilge pump (auto / manual switch)
Jabsco Maintenance bilge pump
High-water bilge alarm
2 manual bilge pumps
Givens 6AY-OS life raft – capacity 6 person (would need reinspection or replacement)
4 fire extinguishers
Alert AR100 man-overboard system with onboard alarm
Flares, smoke and other alerting devices
Many many spares!!!
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Buyer should assume that items on the vessel at the time of viewing, but not specifically listed on this specification sheet, are not included with the sale of the yacht, and should instruct his agents, or his surveyors to investigate such details as the buyer desires validated. Buyer assumes responsibility to verify all speeds, consumptions, capacities and other measurements contained herein and otherwise provided, and agrees to instruct his surveyor to confirm such details prior to purchase. This vessel is subject to sale, price and inventory changes, and withdrawal from market without notice.
MARK MINER
Yacht & Ship Broker
mark@rubiconyachts.com
415-290-1347 - mobile
510-254-3665 - office
3300 Powell St., Ste 105
Emeryville, CA 94608
For additional information and viewing of this fine quality yacht please contact listing agent Mark Miner. I am always available on my mobile phone at 4152901347 or e-mail me at mark@rubiconyachts.com